SPOILER ALERT!
RN104, RN314 factory reset strategy.txt
RN104, RN314 factory reset method
ID: 50223
From: NetGear
Update date: 2013-12-06
Number of visits: 1863
Document applicable solution model: RN10400, RN31400
Note: Restoring the factory settings will format the hard drive, the technique settings is going to be cleared, and all data around the really hard drive will be lost. Be certain to pick the appropriate startup mode.
RN104, RN314 factory reset process:
Shut down the technique;
Use a paper clip to press and hold the Reset hole on the rear panel from the device;
Turn on the program power and start off;
Continue to hold down the Reset hole till the status show on the front panel from the device displays 'BootMenu';
Loosen the reset hole, and lightly press the Backup button around the front panel in the device to pick the startup mode. When the status display shows 'FactoryDefault', it implies to select the 'restore factory settings' mode;
Press the Reset hole around the back panel of the device when and release it to confirm the choice of the startup mode, after which the system will begin within the 'restore factory settings' mode;
Then you will see all of the indicators on the front panel flash, and also the status show shows the countdown information and facts of 'TimeoutinxxMxxS', which indicates that the method enters the 10-minute 'restore time for factory settings'. If how to recover lost partition table enter the factory reset mode by mistake, please turn off the energy right away; if you confirm that you just need to restore the factory settings, you are able to click the backup button on the front panel of your device, the method will promptly format the difficult disk and restore the factory settings. If no operation is done when the countdown is over, the program will automatically format the really hard disk and carry out a factory reset.
According to the number of tough drives, restoring factory settings will take a number of minutes to a dozen minutes. Then make how to recover corrupted partition table of the management tool RAIDar to look for the device and start out performing management.
Please refer for the figure below for the place from the device buttons and indicator lights:
ID: 50223
From: NetGear
Update date: 2013-12-06
Number of visits: 1863
Document applicable solution model: RN10400, RN31400
Note: Restoring the factory settings will format the hard drive, the technique settings is going to be cleared, and all data around the really hard drive will be lost. Be certain to pick the appropriate startup mode.
RN104, RN314 factory reset process:
Shut down the technique;
Use a paper clip to press and hold the Reset hole on the rear panel from the device;
Turn on the program power and start off;
Continue to hold down the Reset hole till the status show on the front panel from the device displays 'BootMenu';
Loosen the reset hole, and lightly press the Backup button around the front panel in the device to pick the startup mode. When the status display shows 'FactoryDefault', it implies to select the 'restore factory settings' mode;
Press the Reset hole around the back panel of the device when and release it to confirm the choice of the startup mode, after which the system will begin within the 'restore factory settings' mode;
Then you will see all of the indicators on the front panel flash, and also the status show shows the countdown information and facts of 'TimeoutinxxMxxS', which indicates that the method enters the 10-minute 'restore time for factory settings'. If how to recover lost partition table enter the factory reset mode by mistake, please turn off the energy right away; if you confirm that you just need to restore the factory settings, you are able to click the backup button on the front panel of your device, the method will promptly format the difficult disk and restore the factory settings. If no operation is done when the countdown is over, the program will automatically format the really hard disk and carry out a factory reset.
According to the number of tough drives, restoring factory settings will take a number of minutes to a dozen minutes. Then make how to recover corrupted partition table of the management tool RAIDar to look for the device and start out performing management.
Please refer for the figure below for the place from the device buttons and indicator lights:
